User's Guide
Datasheets
PDXBot
Robothon
Buy Robots!
View Cart
Shipping
License
Privacy
About
Contact
Mark III Robot Store
 | ||||||||||||||||||||||||||||||||||||||||||||||||||
MEGAbitty Nano Line Sensor Board Kit |
$11.25 | |||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Click for larger image |
Extra-small dual-sensor board kit designed to fit NanoSumo (25mm cube)
or other small robot.
Uses the same circuit as the
Micro Line Sensor Board Kit
but with smaller parts and no indicator LEDs.
Two small infrared photoreflectors are used to
measure surface reflectivity. Analog output reads less than 1V for
distances of ~1-5mm from a white surface, and quickly ramps up to ~5V
beyond 5mm, or for a black surface. Sensor outputs can be hooked
directly to the interrupt input pins of the MEGAbitty and other
microcontrollers or can be used with an ADC.
Only 0.95" x 0.275" x 0.10" thick.
Assembly required.
This is a kit, requiring assembly of extremely small surface-mount components. Advanced soldering skills and a good soldering equipment required. |
Backordered | ||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||
Datasheets
Parts list
|
||||||||||||||||||||||||||||||||||||||||||||||||||
