Mk. III graphic


User's Guide
Datasheets


PDXBot
Robothon

Buy Robots!
View Cart

Shipping
License
Privacy

About
Contact

Mark III Robot Store

MEGAbitty 2-Way Object Sensor Board Kit

$15.50

Click for larger image
Forward-looking object sensor for MEGAbitty or other small robot. Infrared LEDs are used to illuminate the target with modulated IR, while Sharp IS471F sensors are used to detect any reflected light. This "2-Way" board uses two Sharp IS471F IR reflective sensors driving two infrared emitter LEDs per sensor. Each detector's digital output drives low when an object is in range and illuminates a red or green indicator LED.

Detection distance approximately 6 inches, depending on target reflectivity and lighting conditions. Board is small enough to fit within for MicroSumo size restrictions. Only 1.55" x 0.50" x 0.35" thick. Assembly required.

This kit is similar to the MEGAbitty 3-Way Object Sensor Board Kit, but has one less sensor and the printed circuit board is slightly smaller.

In Stock

Datasheets

Parts list

DesignatorDistributorDist. Part #Description
C1DigiKeyPCC1791CT-NDCAP .33UF 16V CERAMIC Y5V 0603
C2DigiKeyPCC1791CT-NDCAP .33UF 16V CERAMIC Y5V 0603
D1Junun QED234DIODE EMIT LED IR 940NM T-1 3/4
D2Junun QED234DIODE EMIT LED IR 940NM T-1 3/4
D3Junun QED234DIODE EMIT LED IR 940NM T-1 3/4
D4Junun QED234DIODE EMIT LED IR 940NM T-1 3/4
D5DigiKey160-1447-1-NDLED SUPER RED CLR THIN 0603 SMD
D6DigiKey160-1446-1-NDLED SUPER GREEN CLR THIN 0603 SMD
R1DigiKeyP1.5KGCT-NDRES 1.5K OHM 1/10W 5% 0603 SMD
R2DigiKeyP1.5KGCT-NDRES 1.5K OHM 1/10W 5% 0603 SMD
U1JununIS471FLIGHT DETECTOR OPIC 940NM
U2JununIS471FLIGHT DETECTOR OPIC 940NM

 
webmaster@junun.org