GWS S03TXF 2BB High-torque Ball-Bearing servo motor.
This motor generates more than 69 oz.in. of torque at 4.8 Volts,
compared to the "standard" servo motor torque of 47 oz.in.
Has two ball bearings.
Comes with accessory package which includes servo arms
and mounting hardware.
NOTE: This high-torque servo motor is 4mm taller
than the standard motor included with the Mark III kit,
so if used with the wheels included with the Mark III kit
your robot will be about 4mm wider than the MiniSumo rules
allow. A Mark III with this motor can be made narrow
enough for MiniSumo only by using custom wheels or modifying
the stock wheels.